|
|
ROTO-Q Gobo Rotators
Roto-Q products have a rugged design for durability
and allow fantastic kinetic lighting effects by rotating one
or two gobos in the same or opposite directions at the same or
varying speeds. The units accept either metal or glass gobos
and fit into most ellipsoidal fixtures that have a drop-in iris
slot, easily creating a "moving" light appearance or
effect. Features a heavy duty retaining ring holding the gobo
in place made of machined aluminum that is secured in place by
two spring clips for easy adjustment and replacement. Roto-Qs
are belt driven for quiet operation using standard 120V and are
designed and tested for use in ETC Source Four, Altman Shakespeare,
and Strand SL fixtures.
Roto-Q Jr
Perfect for Jr-sized projects, the Roto-Q Jr is designed specificaly
for the ETC Sorce 4 Jr fixture and holds one metal or glass pattern.
A 24V DC adapter with 7-foot power cord is supplied with the
unit.
- Compatible Fixtures: ETC Source 4 Jr
- Uses one M Round metal or glass gobo
- 9 1/4"(l) x 3 1/8"(w) x 3/8"(d)
- 1.6 lb
- Variable Speed Rotating: 6 preset speeds 0.8 - 5.75 rpm in
either direction
- 120 VDC 60 hz
- Power Consumption: 0.5 amps @ 24VDC
Item# ROTOQJR Only $349 Qty:
Roto-Q Single
The Roto-Q Single is designed for many popular fixtures and
holds one metal or glass pattern. A 12V DC adapter with 7-foot
power cord is supplied with the unit.
- Compatible Fixtures: ETC Source 4, Altman Shakespeare, Strand
SL, Selecon Pacific
- Uses one B Round metal or glass gobo
- 11 1/4"(l) x 4 3/4"(w) x 2 3/4"(d)
- 2.2 lb
- Variable Speed Rotating: 6 preset speeds; 0.8 - 5.75 rpm
in either direction
- 120 VDC 60 hz
- Power Consumption: 0.5 amps @ 12 VDC
Item# ROTOQS Only $299 Qty:
Roto-Q Dual Spin
Create fantastic effects with the Roto-Q Dual! Holds two metal
or glass patterns. A 12V DC adapter with 7-foot power cord is
supplied with the unit.
- Compatible Fixtures: ETC Source 4, Altman Shakespeare, Strand
SL, Selecon Pacific
- Uses two B Round metal and/or glass gobos
- 11 1/4"(l) x 4 3/4"(w) x 2 3/4"(d)
- 2.2 lb
- Variable Speed Rotating: 6 preset speeds 0.8 - 5.75 rpm in
opposite directions
- 120 VDC 60 hz
- Power Consumption: 0.5 amps @ 12 VDC
Item# ROTOQDUAL Only $399 Qty:
Roto-Q DMX
Take control with the Roto-Q DMX! Rotates two glass or metal
patterns and features speeds from .25 to 25 RPM and has 200 indexable
positions.
- Compatible Fixtures: ETC Source 4, Altman Shakespeare, Strand
SL, Selecon Pacific
- Uses two B Round metal and/or glass gobos
- 11 1/4"(l) x 4 3/4"(w) x 2 3/4"(d)
- 3 lb
- Variable Speed Rotating: 200 indexable positions possible;
0.25 - 25 rpm in opposite directions
- 24 VDC & DMX 512 1990 Protocol
- Power Consumption: 0.5 amps @ 24 VDC
Item# ROTOQDMX Only $499 Qty:
Power Supply for Roto-Q DMX
The Power Supply for Roto-Q DMX converts 120 volts @ 50/60
hertz to 24 volt power output. Features "pig tail"
connectors to transfer data from a console into the accessory;
a 5-pin male Neutrik® connector and a 4-pin female connector.
3-foot power cord.
- 1 3/4"(l) x 3"(w) x 5 3/4"(d)
- 1.5 lbs.
- DMX 512 Controlled
- Protected 5-pin XLR input link
Item ROTOQPS Only $149 Qty:
Multi Roto Q DMX Power Supply
8.1 AMP PSV/Splitter box powers up to 8 Spectra-Q scrollers,
16 Roto-Qs, or a combination.
- 3 1/8"(l) x 9 1/4"(w) x 9"(d)
- 3.5 lbs.
- 100/240 VDC 50/60 Hz
- Power Consumption: 3.4 apms
- DMX 512 Controlled
- Address: 1 to 512 set on 3 rotary dec. switches
- 5-pin XLR DMX link
Item PSU0816 Only $599 Qty:
Super Resolution Glass Gobos
Only $79 each
© Copyright
Star Light & Magic, Inc. · All rights reserved.
|