Your Universal fog machine is shipped directly from our facility to your front door, realizing great savings for you, our valued customer. No middle men, area reps or retail overhead result in a high performance machine for less than half of what you would normally expect to pay.

The first thing you'll notice is that your new Fog Jet comes completely encased in a thick foam insert, keeping it safe during even the roughest of shipping circumstances. This high performance machine is tested and inspected prior to shipping, so that you can be assured of a satisfying fog experience. If you do notice any problems or breakages, notify us right away. You may notice a little moisture in or on the machine. This is because the lines have been filled with fluid to keep the machine lubricated at the time of manufacture. The machine features a DMX IN and DMX OUT port, as well as a port for your wireless controller, which is included and operates as a pull away, full function timer remote.

The remote has many features including volume of fog, time of operation and timed interval between fogging (if any is required). It also includes an over heat sensor and notification, in case you accidentally run out of fluid.

Before plugging it in or going any further, fill the machine with high performance Industry Standard fog fluid from Star Light and Magic. Using a high quality fluid does make a difference, and a low quality fluid will cause pump failure and void the warranty. If the price is "too good to be true" or the fluid is named after a cute animal, you can bet that it will eventually wear down the components of the machine. Make sure the plastic tube is pushed down so that the end is in the bottom of the fluid reservoir.

The Remote can be easily removed by unscrewing the thumb knobs on each side...

...pull the remote out just a few inches. Then unplug the cable from the back....

We have included a 30 foot cable which can be used to run from the remote to the machine

The Universal Fog Machine also comes with a wireless remote. You can plug it in and use it to trigger the machine from up to 300 feet away (line of sight). Do not place the remote on the machine itself. The light on the receiver will got from red to green when it is ready.

Keep in mind that the front nozzle will get very hot during operation. We have placed a safe guard around the nozzle, so it is very difficult to accidentally touch, but remotely possible under the correct circumstances. We have never had a report of such a thing occurring, but are aware that it could. Using the Universal Fog Machine often (once every 1 -2 weeks) is good for the machine, and keeps the components well lubricated.