Welcome to the Briefcase Wireless Confetti System
from Star Light and Magic, inc.

Charging the system: Plug the transformer into the Right hand side of the case. Green light will indicate that the unit is charging and it takes about 6 hours to do so. The meter in the center of the system should read 15 volts. This indicates that it is ready to fire. Do not let the voltage drop below 12 volts. Once the unit is charge, you can take it anywhere and operate it without power. It is completely self-contained.

Each individual launcher plugs into the rear of the case. We have cables available in a variety of lengths up to 60 feet. A longer cord will take slightly longer to fire. There may be a 2 or 3 second time lag between pushing and holding the button and the actual firing of the confetti tube.

The confetti tube slides into the launcher and plugs into the second input jack. Both inputs are the same and it does not matter whether a cable or confetti tube plugs into any particular slot on the launcher.

The Main Switch should switched to "Circuit Test Position". This will allow you to see that you have enough voltage available, wthout accidentily firing a confetti tube. Turn the key "ON".

When you are ready to fire, turn the main switch to "Danger! Fire Position". The unit is now ready to fire.

Press buttons 1 through 6 to fire each corresponding tube. Switch #1 will fire the launcher plugged into #1 in the back of the briefcase, etc.